SKF TMHP Hydraulically assisted jaw puller
|
The SKF hydraulically-assisted pullers TMHP 15, TMHP 30 and TMHP 50 provide new combined forces of puller power and safety. They are self-centring pullers for the occasions when large forces are inevitable.
Loe lähemalt
- Hydraulically assisted pullers with a maximum withdrawal force of 15, 30 or 50 tonnes (33,700 to 112,000 lbf) - Pantograph system for ultimate alignment of withdrawal forces and minimised risk of damaging shaft or bearing - Extreme forces applied with ease (self-centring, lifting handle, eye bolt, etc.) - Can be supplied with or without the SKF hydraulic pump TMJL 100 The SKF TMHP 10E jaw puller kit is equipped with a hydraulic spindle, which facilitates effortless bearing dismounting up to 100 kN (11.2 ton US). The versatile puller kit includes three different arm sizes and can be assembled as a two-arm puller or a three-arm puller depending on the space and demand of the application. - High load rating of 100 kN (11.2 ton US) makes the puller suitable for a variety of dismounting jobs - The 3 different arm sizes, with a maximum effective arm length of 200 mm (7.8 in), make the TMHP 10E suitable for use in a wide range of applications - The self-locking arms minimise the risk of the puller slipping from the application when under load - Hydraulic spindle facilitates effortless dismounting - Hydraulic spindle is equipped with a safety valve, which minimises the risk of puller overload by limiting the applied force to 100 kN (11.2 ton US) - Long stroke of hydraulic spindle, 80 mm (3.1 in), facilitates dismounting in one operation - Extension pieces of the hydraulic spindle allow quick adaptation to pulling length - The spring-loaded centre point of the hydraulic spindle allows easy centring of the puller on the shaft without damaging it |