TMHP 50-3 Varuvars 570mm

The SKF hydraulically-assisted pullers TMHP 15, TMHP 30 and TMHP 50 provide new combined forces of puller power and safety. They are self-centring pullers for the occasions when large forces are inevitable.
- Hydraulically assisted pullers with a maximum withdrawal force of 15, 30 or 50 tonnes (33,700 to 112,000 lbf)
- Pantograph system for ultimate alignment of withdrawal forces and minimised risk of damaging shaft or bearing
- Extreme forces applied with ease (self-centring, lifting handle, eye bolt, etc.)
- Can be supplied with or without the SKF hydraulic pump TMJL 100

The SKF TMHP 10E jaw puller kit is equipped with a hydraulic spindle, which facilitates effortless bearing dismounting up to 100 kN (11.2 ton US). The versatile puller kit includes three different arm sizes and can be assembled as a two-arm puller or a three-arm puller depending on the space and demand of the application.

- High load rating of 100 kN (11.2 ton US) makes the puller suitable for a variety of dismounting jobs
- The 3 different arm sizes, with a maximum effective arm length of 200 mm (7.8 in), make the TMHP 10E suitable for use in a wide range of applications
- The self-locking arms minimise the risk of the puller slipping from the application when under load
- Hydraulic spindle facilitates effortless dismounting
- Hydraulic spindle is equipped with a safety valve, which minimises the risk of puller overload by limiting the applied force to 100 kN (11.2 ton US)
- Long stroke of hydraulic spindle, 80 mm (3.1 in), facilitates dismounting in one operation
- Extension pieces of the hydraulic spindle allow quick adaptation to pulling length
- The spring-loaded centre point of the hydraulic spindle allows easy centring of the puller on the shaft without damaging it