Type B3

Üksikasjad
Conditions of use Pressure: ≤400 bar Temperature: -35 °C ... +110 °C Speed: ≤0.5 m/s Liquids: mineral oil-based hydraulic fluids Gap >e< is selected according to the operating conditions using a nomogram. Material The Parker material P5008 is a polyurethane-based elastomer, hardness 93 Shore A. Compared to other polyurethanes, it has very good heat resistance, low residual compression and improved hydrolysis resistance. Installation Can be mounted in both a groove that can be disassembled (B) and a closed groove (A). Seals are available for grooves corresponding to ISO 5597/1. Advantages -Especially good wear resistance -Low residual compression -Highly resistant to pressure spikes and impact loads -Suitable for even the toughest conditions -High gap penetration resistance -Easy to install Loe lähemalt

Kuvamisviis Nimekiri Laud

Selgitused

Toodete saadavusinfo tellimisel. Sisselogituna näete laoseisu meie erinevates kauplustes.

Registreeritud kasutajale kuvatud hinnad ei sisalda käibemaksu

80672060500 B3 P5008 55 X 65 X 10 Rod seal

Müügiüksus: Piece

Internal diameter mm: 55

External diameter mm: 65

L mm: 11

Type: B3

Housing dimension L=: 11

datafield_23575509: -35

Material: P5008

datafield_23575510: 100

Height mm: 10

Leaking pressure_Bar: 400

Nendes kohtades laos:

Ostlemise Valikud