Teie ettevõtte kontoga seotud kliendinumber on blokeeritud. Kui teil on küsimusi, võtke ühendust oma ettevõtte administraatoriga või kirjutage aadressile [email protected].
Keel
et
  • Logige sisse või registreeruge
Logige sisse või registreeruge
Tooted Sirvi tooteid
Ostunimekiri
Otsi
()
Menüü
Konto
Seaded
Keel
et

O rings FPM (Viton)

O rings FPM (Viton)
Üksikasjad
Dimensioning of O-rings
The dimensions of the O-rings are always given as the inner diameter of the O-ring (d1) x the thickness of the material (d0).

FLUORINE RUBBER (VITON / FPM)
Fluorine rubber is suitable for use with many chemicals and substances. FPM has excellent dust heat resistance. It has good resistance to ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatic solvents as well as many organic solvents and chemicals.
FPM does not have especially good cold resistance. -25 ºC in static use (no leakage detected in -40 ºC under certain conditions).
In dynamic use -15 to -20 ºC can be achieved. Gas permeability is very low and comparable to butyl rubber.
There are also special versions of fluorine rubber (VITON) for different applications.
Suitable for use with:
- mineral oils and greases; low expansion. ASTM oils no. 1-3
- non-combustible hydraulic fluids, HFD group
- silicone group and fat
- vegetable fats and oils
- aliphatic hydrocarbons (fuels, butane, propane, natural gases)
- aromatic hydrocarbons (trichlorethylene, carbon tetrachloride)
- fuels that contain methanol
- very low pressures
- very good resistance to ozone, weather and aging
Not suitable for:
- polar solvents (acetone, methyl ester ketone, diethyl ether, diethylene dioxide)
- glycol-based brake fluids
- ammonia gas, amines, bases
- small molecule organic acids (formic acid, acetic acid)
- water vapour and hot water
Heat resistance:
Operating temperature is approx. +200 ºC and temporarily higher, which will reduce service life.
Cold resistance:
Lowest operating temperature is -25 ºC, changes based on composition. Special versions are available for cold environments.
CAUTION: Burnt fluorine rubber must be handled as a corrosive substance.
Loe lähemalt
Kuvamisviis Nimekiri Laud

Selgitused

  • Kesklaos Soomes ( tarneaeg 3-4 pv )
  • Vaata saadavust meie kauplustes
  • Tellimustoode või piiratud saadavus. Tarneaeg kinnitatakse eraldi

Toodete saadavusinfo tellimisel. Sisselogituna näete laoseisu meie erinevates kauplustes.

Registreeritud kasutajale kuvatud hinnad ei sisalda käibemaksu

Grouped product items
Tootekood Toote nimi Müügiüksus Internal diameter mm Type Cross cut_mm datafield_23575509 Material datafield_23575510 Ladu Kogus
80638001200
OR 2,0x1,0 FPM O-rongas Piece 2 OR 1 -20 FPM 200
TK
80638004000
OR 3,0x1,0 FPM O-Ring Piece 3 OR 1 -20 FPM 200
TK
80638006000
OR 3,1x1,6 FPM O-Ring Piece 3,1 OR 1,6 -20 FPM 200
TK
80638011300
OR 4,0x1,5 FPM O-Ring Piece 4 OR 1,5 -20 FPM 200
TK
80638014000
OR 4,47x1,78 FPM O-Ring Piece 4,47 OR 1,78 -20 FPM 200
TK
80638014800
OR 5,0x1,75 FPM O-Ring Piece 5 OR 1,75 -20 FPM 200
TK
80638015500
OR 5,0x2,5 FPM O-Ring Piece 5 OR 2,5 -20 FPM 200
TK
80638020000
OR 6,0x2,0 FPM O-Ring Piece 6 OR 2 -20 FPM 200
TK
80638028200
OR 7,0x1,0 FPM O-Ring Piece 7 OR 1 -20 FPM 200
TK
80638031300
O-rõngas OR 7,52x3,53 FPM O-RoNGAS Piece 7,52 OR 3,53 -20 FPM 200
TK
80638036800
OR 9,0x1,0 FPM O-Ring Piece 9 OR 1 -20 FPM 200
TK
80638036900
OR 9,0x1,5 FPM O-Ring Piece 9 OR 1,5 -20 FPM 200
TK
80638048000
OR 10,0x2,0 FPM O-Ring Piece 10 OR 2 -20 FPM 200
TK
80638049000
OR 10,0x2,5 FPM O-Ring Piece 10 OR 2,5 -20 FPM 200
TK
80638056000
OR 10,77x2,62 FPM O-Ring Piece 10,77 OR 2,62 -20 FPM 200
TK
80638058200
OR 10,82x1,78 FPM90 O-Ring Piece 10,82 OR 1,78 -20 FPM 200
TK
80638070000
OR 12,0x2,0 FPM O-Ring Piece 12 OR 2 -20 FPM 200
TK
80638080000
OR 13,0x2,0 FPM O-Ring Piece 13 OR 2 -20 FPM 200
TK
80638087500
OR 14,0x2,5 FPM O-Ring Piece 14 OR 2,5 -20 FPM 200
TK
80638092000
OR 14,1x1,6 FPM O-rongas Piece 14,1 OR 1,6 -20 FPM 200
TK
80638095500
OR 15,0x3,0 FPM O-rongas Piece 15 OR 3 -20 FPM 200
TK
80638107000
OR 17,0x2,5 FPM O-Ring Piece 17 OR 2,5 -20 FPM 200
TK
80638108000
OR 17,2x3,0 FPM O-Ring Piece 17,2 OR 3 -20 FPM 200
TK
80638116000
OR 17,17x1,78 FPM 017 O-Rongas Piece 17,17 OR 1,78 -20 FPM 200
TK
80638124000
OR 18,0x3,0 FPM O-Ring Piece 18 OR 3 -20 FPM 200
TK
80638135000
OR 18,77x1,78 FPM O-Ring Piece 18,77 OR 1,78 -20 FPM 200
TK
80638137000
OR 19,0x2,0 FPM O-Ring Piece 19 OR 2 -20 FPM 200
TK
80638140000
OR 19,2x3,0 FPM O-Ring Piece 19,2 OR 3 -20 FPM 200
TK
80638149000
OR 20,2x3,0 FPM O-Ring Piece 20,2 OR 3 -20 FPM 200
TK
80638152000
OR 20,30x2,62 FPM O-Ring Piece 20,3 OR 2,62 -20 FPM 200
TK
80638154500
O-rõngas 20,32x1,78 FPM O-RoNGAS Piece 20,32 OR 1,78 -20 FPM 200
TK
80638158000
OR 21,95x1,78 FPM O-Ring Piece 21,95 OR 1,78 -20 FPM 200
TK
80638174500
OR 25,0x1,0 FPM O-Ring Piece 25 OR 1 -20 FPM 200
TK
80638188500
OR 26,0x2,0 FPM O-Ring Piece 26 OR 2 -20 FPM 200
TK
80638197000
O-rõngas 28,0x2,5 FPM O-RoNGAS Piece 28 OR 2,5 -20 FPM 200
TK
Vali
Ostlemise Valikud
Otsi tootegrupist
Internal diameter mm