kruvik. DFT060TMZ 18V

High precision screwdriver with electronic torque sensor for assembly work. Ergonomic and lightweight machine for continuous use. The very light and short-acting operating switch also increases user-friendliness. The compact size fits into tight spaces - from the center of the screwdriver head to the top of the machine only 26mm. Weight with 2.0Ah battery only 1.4 kg. A bright and adjustable dual LED light clearly illuminates the work area.

When tightening, the machine stops when the desired tightening torque is reached and the green indicator light comes on momentarily. If there is something wrong with the joint and tightening does not occur as it should, the machine will beep and the red indicator light will illuminate. A low battery warning is given by an indicator light until the battery is completely discharged. The indicator lights also indicate the need for future maintenance. The machine itself does not require any maintenance beyond normal cleaning, but the user can set the desired service interval.

The desired tightening torque is set by computer software between 2-6Nm. The rotation speed is adjustable between 50-1000 min-1. The program can also be used to adjust the different stages of tightening, e.g. initially a reverse rotation to ensure that the screw hits the thread, then full speed to remove the "empty" sections from long screws, and finally a slowdown to slower revolutions to control the final tightening. All this automatically and very quickly by pressing the operating switch.

The basic version is supplied without battery and charger. Recommended battery 18V / 2.0Ah