The store will not work correctly when cookies are disabled.
Teie ettevõtte kontoga seotud kliendinumber on blokeeritud. Kui teil on küsimusi, võtke ühendust oma ettevõtte administraatoriga või kirjutage aadressile [email protected].
Cleaning agent for surfaces resistant to acidic substances, such as tiles, sanitary porcelain, and stainless steel, as well as for preventing and removing deposits in damp areas.
Usage: Routine cleaning: Dosage 1 - 4 ml of Kiilto Pro Sanitop per 1 liter of water. Apply the solution to the surfaces and let it work on toilet fixtures and washbasin surfaces for 5 minutes or as needed. Scrub the surface clean, rinse, and dry.
Periodic cleaning: Dosage 10 ml / 1 l of water. Apply the solution to the surfaces and let it work on toilet fixtures and washbasin surfaces for 5 minutes or as needed. Scrub the surface clean, rinse, and dry.
Foam cleaning method: Dosage 20 ml / 1 liter of water. Rinse the area to be cleaned with water first. Apply the solution to the surface with a low-pressure washer or foaming device and let it work for 5-10 minutes. Wash the surface thoroughly and rinse with clean water after washing. Dry the surfaces thoroughly.
Removing deposits from vertical surfaces: Wet the surfaces. Apply Kiilto Pro Sanitop undiluted to the surfaces and let it work for 5 - 10 minutes. Ensure that the surface does not dry out. Scrub the surface clean, rinse thoroughly, and dry the surface.
Keep in a warm place. The shelf life is 5 years from the date of manufacture, when stored properly.
Kiilto Pro Sanitop is part of the Kiilto Pro Natura product family. Natura products contain plant-based, renewable raw materials that are produced sustainably. The bio-based raw materials decompose quickly during wastewater treatment. Kiilto Pro Natura is a step towards the cleaning products of the future!
Kiilto Pro Sanitop is also EcoLabel certified. This is a clear and impartial indication of the product's environmental friendliness and minimal climate impact throughout its life cycle. The label means that the substances contained in the product have as little impact on the environment as possible.
The Allergy Label granted to Kiilto Pro Sanitop by the Allergy, Skin and Asthma Federation of Finland indicates that the product does not typically cause skin irritation or sensitization nor hypersensitivity reactions, allergies, or asthma reactions.
Kiilto Pro Sanitop also bears the Key Flag symbol. This registered mark indicates that the product is manufactured in Finland. The ingredients are environmentally friendly and easily degrade during wastewater treatment. We recommend that empty rinsed packaging be recycled and reused as material. They can also be repurposed as energy. Transport packaging is recyclable.
Safety: Avoid unnecessary skin contact. Protective gloves are recommended for continuous use. If the product comes into contact with eyes, rinse immediately with plenty of water and seek medical attention if necessary.
Do not mix Kiilto Pro Sanitop with chlorine-containing substances.
Do not use in conjunction with chlorine-based products.
