Teie ettevõtte kontoga seotud kliendinumber on blokeeritud. Kui teil on küsimusi, võtke ühendust oma ettevõtte administraatoriga või kirjutage aadressile [email protected].
703202276040

Concrete Screw S-CSA P 6x40/5(FL)ML

Multi Layer, flange head, T30
TK
Hulgimüügipartii 100 TK

Selgitused

  • Kesklaos Soomes ( tarneaeg 3-4 pv )
  • Vaata saadavust meie kauplustes
  • Tellimustoode või piiratud saadavus. Tarneaeg kinnitatakse eraldi

Toodete saadavusinfo tellimisel. Sisselogituna näete laoseisu meie erinevates kauplustes.

Registreeritud kasutajale kuvatud hinnad ei sisalda käibemaksu

Üksikasjad
Application:
Concrete screw with flange head and corrosion protection coating (C3)

Properties:
- S-CSA P (FL) ML self-tapping, approved screw anchors for push-through installations. Head height 3,5 mm and head diameter 17,4 mm.
- Requires a small drill hole diameter. No prescribed tightening torque.
- No expansion forces allowing for small edge distances and spacings
- Fully removable
- CE/ETA available, ETA-17/1009: in size 6 for multiple use for non-structural application in concrete and in pre-stressed hollow-core slabs
- Also suitable for solid clay brick and solid sand-lime brick
- Fire exposure R120 in concrete
- Made in Finland
- ML (Multi Layer) corrosion protection coating tested 2016 hours in SST acc. ISO 9227 and then fulfills the requirements for the neutral salt spray test with the corrosion class „C3 very high“ according to DIN EN ISO 12944-6:2018-06
- For indoor and outdoor use taking into account possible restrictions in intended use
Loe lähemalt
Base type logo 1