B3 P5008 55x65x10

Conditions of use
Pressure: ≤400 bar
Temperature: -35 °C ... +110 °C
Speed: ≤0.5 m/s
Liquids: mineral oil-based hydraulic fluids
Gap >e< is selected according to the operating conditions using a nomogram.
Material
The Parker material P5008 is a polyurethane-based elastomer, hardness 93 Shore A.
Compared to other polyurethanes, it has very good heat resistance, low residual compression and improved hydrolysis resistance.
Installation
Can be mounted in both a groove that can be disassembled (B) and a closed groove (A).
Seals are available for grooves corresponding to ISO 5597/1.
Advantages
-Especially good wear resistance
-Low residual compression
-Highly resistant to pressure spikes and impact loads
-Suitable for even the toughest conditions
-High gap penetration resistance
-Easy to install