Sormat Dome head coated

Üksikasjad
Application: ETA-approved concrete screw for cracked and non-cracked concrete (Size: 6 mm) Properties: -Self-tapping, approved screw anchors for push-through installations. -Requires a small drill hole diameter. No prescribed tightening torque. -No expansion forces allowing for small edge distances and spacings. -Fully removable. - CE/ETA available. ETA Option 1 approval (ETA-16/0945) for cracked and uncracked concrete. -ETA-17/1009: Sormat S-CSA Concrete screw in size 6 for multiple use for non-structural application in concrete and in pre-stressed hollow-core slabs. Fire exposure R120. - Also suitable for solid clay brick and solid sand-lime brick - Made in Finland -ML (Multi Layer) corrosion protection coating tested 2016 hours in SST acc. ISO 9227 and then fulfills the requirements for the neutral salt spray test with the corrosion class „C3 very high“ according to DIN EN ISO 12944-6:2018-06. -For outdoor use in not safety relevant applications. Loe lähemalt

Kuvamisviis Nimekiri Laud

Selgitused

Toodete saadavusinfo tellimisel. Sisselogituna näete laoseisu meie erinevates kauplustes.

Registreeritud kasutajale kuvatud hinnad ei sisalda käibemaksu

703202276040 Concrete Screw S-CSA P 6x40/5(FL)ML Multi Layer, flange head, T30

Kesklao toode: Jah

Müügiüksus: Tükk

Pöördemoment: TX30

Pikkus mm: 40

Augu diameeter mm: 6

Pinnatöötlus: Multi Layer

Materjal: Teras

Sormat type: S-CSA

Poldipea tüüp: Flat head

Material thickness for fastening (tfix,1) mm: 5

Free hole of the material for fastening mm: 9

Installation depth (hnom,1) mm: 35

Effective installation depth (hef,1) mm: 27,6

Drill hole depth (h1,1) mm: 45

Head diameter (dk) mm: 17,4

Tightening torque max (Nm) (Tinst): 14

Minimum mounting base thickness (hmin,1) mm: 80

LVI-number: 3255753

Nendes kohtades laos:

Hulgimüügipartii 100 TK

Ostlemise Valikud