Teie ettevõtte kontoga seotud kliendinumber on blokeeritud. Kui teil on küsimusi, võtke ühendust oma ettevõtte administraatoriga või kirjutage aadressile [email protected].
Keel
et
  • Logige sisse või registreeruge
Logige sisse või registreeruge
Tooted Sirvi tooteid
Ostunimekiri
Otsi
()
Menüü
Konto
Seaded
Keel
et

Sormat Countersunk A4

Sormat Countersunk A4
Üksikasjad
Purpose:
Oxygen resistant A4 concrete screw with countersunk head for demanding corrosive conditions

Characteristics:
- S-CSA CS A4 concrete screws with countersunk head T30 are designed for through-hole installations
- Requires only a small drill hole
- No predefined tightening torque
- Allows for small anchor spacings and edge distances
- Screws are fully removable
- The anchor body is made of cold-worked, acid-resistant A4 steel (1.4401), with an attached carbon steel tip ensuring a secure fit even in hard materials. The screw has a coating.
- CE/ETA approved. ETA Option 1 approval (ETA-22/0413) for non-cracked and cracked concrete. Fire rated R120.
- Made in Finland
- The screw cap is marked "A4"
- HST A4 for indoor, outdoor, and industrial use in demanding corrosive conditions
Loe lähemalt
Kuvamisviis Nimekiri Laud

Selgitused

  • Kesklaos Soomes ( tarneaeg 3-4 pv )
  • Vaata saadavust meie kauplustes
  • Tellimustoode või piiratud saadavus. Tarneaeg kinnitatakse eraldi

Toodete saadavusinfo tellimisel. Sisselogituna näete laoseisu meie erinevates kauplustes.

Registreeritud kasutajale kuvatud hinnad ei sisalda käibemaksu

Grouped product items
Betoonikruvi S-CSA CS 6x50/5 A4 703202796050 Betoonikruvi S-CSA CS 6x50/5 A4 Countersunk T30 stainless steel A4
Kesklao toode: Jah
Müügiüksus: Tükk
Pöördemoment: TX30
Pikkus mm: 50
Augu diameeter mm: 6
Pinnatöötlus: A4
Materjal: A4
Poldipea tüüp: Lame-pea
Material thickness for fastening (tfix,1) mm: 5
Free hole of the material for fastening mm: 9
Installation depth (hnom,1) mm: 45
Effective installation depth (hef,1) mm: 34
Drill hole depth (h1,1) mm: 55
Head diameter (dk) mm: 14
Tightening torque max (Nm) (Tinst): 14
Minimum mounting base thickness (hmin,1) mm: 80
LVI-number: 3255741
Nendes kohtades laos:
TK
Hulgimüügipartii 100 TK
Betoonikruvi S-CSA CS 6x60/15/5 A 703202796060 Betoonikruvi S-CSA CS 6x60/15/5 A Countersunk T30 stainless steel A4
Kesklao toode: Jah
Müügiüksus: Tükk
Pöördemoment: TX30
Pikkus mm: 60
Augu diameeter mm: 6
Pinnatöötlus: A4
Materjal: A4
Poldipea tüüp: Lame-pea
Material thickness for fastening (tfix,1) mm: 15
Material thickness for fastening (tfix,2) mm: 5
Free hole of the material for fastening mm: 9
Installation depth (hnom,1) mm: 45
Installation depth (hnom,2) mm: 55
Effective installation depth (hef,1) mm: 34
Effective installation depth (hef,2) mm: 42,5
Drill hole depth (h1,1) mm: 55
Drill hole depth (h1,2) mm: 65
Head diameter (dk) mm: 14
Tightening torque max (Nm) (Tinst): 14
Minimum mounting base thickness (hmin,1) mm: 80
Minimum mounting base thickness (hmin,2) mm: 100
LVI-number: 3255742
Nendes kohtades laos:
TK
Hulgimüügipartii 100 TK
Betoonikruvi S-CSA CS 6x70/25/15 A 703202796070 Betoonikruvi S-CSA CS 6x70/25/15 A Countersunk T30 stainless steel A4
Kesklao toode: Jah
Müügiüksus: Tükk
Pöördemoment: TX30
Pikkus mm: 70
Augu diameeter mm: 6
Pinnatöötlus: A4
Materjal: A4
Poldipea tüüp: Lame-pea
Material thickness for fastening (tfix,1) mm: 25
Material thickness for fastening (tfix,2) mm: 15
Free hole of the material for fastening mm: 9
Installation depth (hnom,1) mm: 45
Installation depth (hnom,2) mm: 55
Effective installation depth (hef,1) mm: 34
Effective installation depth (hef,2) mm: 42,5
Drill hole depth (h1,1) mm: 55
Drill hole depth (h1,2) mm: 65
Head diameter (dk) mm: 14
Tightening torque max (Nm) (Tinst): 14
Minimum mounting base thickness (hmin,1) mm: 80
Minimum mounting base thickness (hmin,2) mm: 100
LVI-number: 3255743
Nendes kohtades laos:
TK
Hulgimüügipartii 100 TK
Betoonikruvi S-CSA CS 6x100/55/45 A 703202796100 Betoonikruvi S-CSA CS 6x100/55/45 A Countersunk T30 stainless steel A4
Kesklao toode: Jah
Müügiüksus: Tükk
Pöördemoment: TX30
Pikkus mm: 100
Augu diameeter mm: 6
Pinnatöötlus: A4
Materjal: A4
Poldipea tüüp: Lame-pea
Material thickness for fastening (tfix,1) mm: 55
Material thickness for fastening (tfix,2) mm: 45
Free hole of the material for fastening mm: 9
Installation depth (hnom,1) mm: 45
Installation depth (hnom,2) mm: 55
Effective installation depth (hef,1) mm: 34
Effective installation depth (hef,2) mm: 42,5
Drill hole depth (h1,1) mm: 55
Drill hole depth (h1,2) mm: 65
Head diameter (dk) mm: 14
Tightening torque max (Nm) (Tinst): 14
Minimum mounting base thickness (hmin,1) mm: 80
Minimum mounting base thickness (hmin,2) mm: 100
LVI-number: 3255744
Nendes kohtades laos:
TK
Hulgimüügipartii 50 TK
Vali
Ostlemise Valikud
Otsi tootegrupist
Pikkus mm