Type E8

Details
Type E8 E8 Parker-PDF Rod seal / Wiper Operating conditions Pressure= 16 bar Temperature: -20°C...+80°C Speed= 1 m/s Medium:Oil lubricated air, dry air (cylinder should be permanent lubricated during installation) Materials U-ring: PDFs NBR based special material Wiper / Fastener: PDFs wear resistant plastic Installation Seal/wiper set E8 can be installed in to Din 7993 type B circlip locked housings. The wiper ring EA locks the complete set into the sealing groove. The sealing set can easily be replaced even with the piston rod installed. Ask for instructions on dimensioning the housing if needed. Advantages - No danger of corrosion as the combined fixing/scraping part renders additional circlips etc. unnecessary - If only one scraper is required, the fixing/scraping part profile EA may be used without the sealing part. Modification of the housing is not required. - Low friction and long lifespan due to special compound and lip geometry Read more

View as List Table

Store availability is shown for logged in users. Product availability subject to prior sales.

Description

At central warehouse in Finland(delivery in 3-4 days)
In Megacenter (see store availability)
Ordered upon request or limited availability, delivery time will be confirmed after order

The prices are shown to registered users excluding VAT (VAT 0%)

80674032000 E8 00606 32 X 42 X 11,5 Pneumatic seal

Sales unit: Piece

H1 mm: 6,45

Internal diameter mm: 32

External diameter mm: 42

Height mm: 11,5

Type: E8

Housing dimension L=: 14

datafield_23575509: -20

Material: W5035/NBR

datafield_23575510: 80

Leaking pressure_Bar: 16

In stock at these locations:

Shopping Options