Torque wrench 714/40 EL 40-400Nm

Stahlwille electronic torque wrench with interchangeable head. This model is suitable for both maintenance and series production use. The desired torque is quickly adjusted using the keypad located at the front of the handle. The keys have automatic lock to prevent unintentional adjustments to the settings. Freely configurable menu structure. Three operating modes: trigger, peak value (indicating mode + peak value), and tracking (indicating mode + instantaneous value). Quick-release safety lock. Data storage (<–2500 torques). Can be programmed for a maximum of 200 torques, with up to 25 preset sequences. Different tolerance limits can be set for each torque. Acoustic and visual assessment of tightening. Tightening in both clockwise and counter-clockwise – the interchangeable tool may need to be rotated (180°) for counter-clockwise tightening in trigger mode. Torque and angle displayed simultaneously. The delivery includes SENSOMASTER 4 software, USB cable, and 4 AAA/LR03 batteries. The device can use either AAA-sized 1.5 volt batteries or 1.2 volt NiMH batteries.

- 714 MANOSKOP series
- Indicating and trigger model
- Measurement units: N·m, ft·lb, in·lb
- Automatic notification of the next calibration time based on either tightening amount or time interval
- Micro USB connection
- Precision ±2%