Screwdriver DFT120TMZ 18V

Highly precise screwdriver for assembly work with an electronic torque sensor. Ergonomic and lightweight machine for continuous use. User comfort is further enhanced by an exceptionally light and short-stroke operating switch. The compact device fits even into tight spaces - only 26mm from the center of the screw head to the top of the machine. Weight with 2.0Ah battery is only 1.4 kg. A bright and adjustable dual LED light clearly illuminates the work area.

When tightening, the machine stops when the desired tightening torque is reached and the green indicator light briefly illuminates. If there is an issue with the connection and tightening is not completed as it should be, the machine emits an audible signal and a red indicator light turns on. A warning light indicates a depleting battery before the battery is completely discharged. Indicator lights also notify about upcoming maintenance needs. The machine itself requires no more maintenance than normal cleaning, but the user can set the desired maintenance interval.

The desired tightening torque is set through computer software within the range of 4-12Nm. The rotation speed is adjustable between 50-700 min-1. The software can also configure different tightening phases, such as initially running the screw backwards to ensure it catches the thread, then at full speed to remove "empties" from long screws, and finally slowing down to control the final tightening. All this happens automatically and very quickly by pressing the operating switch.

The frame version is supplied without battery and charger. Recommended battery 18V / 2.0Ah