Concrete screw FBS II CP 14x100

Fischer UltraCut FBS II CP US concrete screw with innovative surface treatment is an effective anchoring solution for quick installations, with a coating that ensures better corrosion protection. ETA approval for cracked and non-cracked concrete as well as seismic loads, along with R 120 fire classification, provides even greater safety.

Serrated geometry allows for fast and easy installation. Cleaning of drill holes is not required when installing in ceilings or floors. The innovative surface treatment provides additional corrosion protection compared to the FBS II galvanized concrete screw (proven also by salt spray test exceeding 2000 hours). The special serrated geometry enables quick cutting into concrete. ETA approval covers performance classes C1 and C2 in cracked concrete and seismic applications.

No cleaning of the drill hole is necessary for horizontal installation (ceiling and floor) or when using a hollow drill. The hole must be 3 times the diameter of the drilled hole deeper in drilled holes in floors. Compliance with the regulations allows for the screw to be unscrewed twice and the fixture to be set or placed underneath. Three approved embedment depths allow for the use of screws in a wide range of substrates, ensuring excellent flexibility.